wood wool wall panel
The production process of the wood wool board: the poplar wood is cut into wood wool by a planer, the wood wool and cement required for a single sheet of wood wool board is weighed, the wood wool is soaked in water and mixed with cement in a mixer, the mixed wood wool and cement is sprinkled evenly into the mould; each completed mould is fed into a cold press, the machine is turned on to compact the fluffy mixture, the concrete is placed above the stack of moulds coming out of the press. The slabs are removed from the moulds and dried under natural conditions, and finally the slabs are cut to size, sanded, painted and edged.
The first step is to make wood wool wall panel is to use a planer to cut the poplar wood to a length of 20cm-30cm and a thickness of 0.2-0.5mm. After soaking in water for 1 - 2 minutes, mix the wood wool with the cement in a mixer with a speed of 10 - 20 rpm and a mixing time of 3 - 7 minutes. The height of the stack of moulds is controlled at 20-40 pieces. The whole stack is removed from the press for curing at a pressure of 0.3-0.5 Mpa. The slabs are cut to size, sanded, painted and edged.