+8618127974693

glass acoustic ceiling tiles

Jan 06, 2022

glass wool3

glass acoustic ceiling tiles is a porous sound absorbing material with good sound absorption and fire resistance. It has remarkable sound absorption properties due to the large number of voids formed by the intersection of glass fibre wool inside it. When the sound in the air reaches the glass fibre ceiling, the sound waves enter the material along the voids and are consumed due to the constant friction with the internal material, the sound energy is eventually converted into heat energy.

 

Sound absorption of fiber glass ceiling tile

glass acoustic ceiling tiles have a relatively good sound absorption performance in the middle and high frequencies of sound. The strength of the sound absorption performance is mainly due to the air flow resistance, the thickness and density of the material. Air flow resistance is the ratio of air pressure and air flow rate on both sides of the material per unit thickness, and density is the weight of the material per cubic metre. One of the biggest factors in sound absorption performance is the air flow resistance. If the material is thin, the air flow resistance is relatively small, so when the sound waves pass into the material, the sound waves are easy to pass through, the friction is relatively small, the consumption of sound energy is less, so the sound absorption performance is reduced; but if the material is too dense, the relative air flow resistance is large, so the air vibration is difficult to pass into, the sound absorption performance is also reduced. Therefore, for the internal glass fibre wool, a suitable air flow resistance is required.

 case3

 detail123

detail213

In practice,glass acoustic ceiling tiles is difficult to determine the air flow resistance and it is difficult to have accurate data, but we can roughly estimate and control it by thickness and weight. The following data have been obtained from experiments.

1. Increasing the thickness of the glass fibre wool inside the ceiling, it was found that the sound absorption coefficient of the glass acoustic ceiling tiles for low and medium frequencies was significantly enhanced, although the absorption ratio for high frequencies was always greater, but the change in high frequencies was not significant.

2, the thickness remains the same, the capacity increases, the low and medium frequency absorption coefficient also increases; but when the capacity increases to a certain extent, the material becomes dense, the flow resistance is greater than the better flow resistance, but the absorption coefficient decreases. For thickness * 5cm over the weight of 16Kg/m3 of centrifugal glass wool, low frequency 125Hz is about 0.2, high frequency (> 500Hz) absorption coefficient has been close to 1. When the thickness continues to increase from 5cm, the absorption coefficient of low frequency gradually increases, when the thickness is greater than 1m or more, the absorption coefficient of low frequency 125Hz will also be close to 1. When the thickness remains the same, when the capacity increases, the low frequency absorption coefficient of centrifugal glass wool will also continue to improve, when the capacity is close to 110kg/m3 sound absorption performance reaches a larger value, 50mm thick, frequency 125Hz close to 0.6- 0.7. When the capacity* exceeds 120 kg/m3, the sound absorption performance decreases because the material becomes dense and the absorption performance in the middle and high frequencies is greatly affected, and when the capacity* exceeds 300 kg/m3, the sound absorption performance decreases a lot. The thickness of acoustic glass wool commonly used in building acoustics is 2.5cm, 5cm, 10cm, with a capacity of 16, 24, 32, 48, 80, 96, 112kg/m3. 5cm thick, 12-48kg/m3 is usually used.


Send Inquiry