Most people install sound-absorbing panels for better sound insulation. Sound-absorbing panel manufacturers have good sound insulation measures. Let's take a look at the editor below. There are several sound insulation measures.
1. In order to avoid the anastomosis effect of the light wall, the quality of the materials of each layer can be varied to stagger the anastomosis valley.
2. Make a sandwich structure. That is, the porous elastic plant sound-absorbing material is sprayed densely. For example, the light wall structure with double-layer 12mm thick plasterboard, steel keel, 75mm hollow and filled with ultra-fine glass wool on both sides can achieve an average sound insulation of 49dB, and its unit area mass is only tenth of a 240mm thick brick wall. One part.
3. When the thickness of the air interlayer is increased to more than 5mm, the sound insulation can be increased by 8-10dB in most frequency bands. If both sides are 75mm thick aerated concrete slabs and 75mm light wall structure in the air, the average sound volume can reach 50dB. Filling the air interlayer with new stage sound-absorbing materials can increase the sound insulation by 2-8dB.
4. The tightness of the board seam of the light wall has a greater impact on the sound insulation. Double-layer boards should be overlapped with staggered seams, and single boards should be plastered or jointed.
Nowadays, the noise in life is very loud, so we must do sound insulation work, we must not let noise affect our lives, and we must pay attention to the harm that noise brings to us.
